If your work is textured to begin with, apply ArtResin with a foam brush, in and out of the areas of relief, to provide an even layer of resin.

Yes, a textured surface not only looks great but can cover up imperfections in your piece.

Can I Get A Textured Surface with ArtResin?.

Can I get a textured surface with resin?.

It could take up to 10 days for a full cure, depending on how many layers you've poured. The thicker your layers are, the longer the cure time will be.

Keep in mind that our recommendation of a 72hr cure time is based on a 1/8' layer.

Can I Pour A Thick Layer Of Resin On My Artwork?.

Repeat these steps as many times as you'd like. Torch out bubbles, cover and let this layer dry.

The second option is to allow the first layer to fully dry, then give the piece an overall light sanding and pour on the next 1/8' layer.

This method is especially handy when pouring into a mold or a dam. At this point, you can pour on the next 1/8' layer, torch out bubbles, cover, wait 3-5 hrs and repeat until you reach the height you desire. The first is to pour your initial layer, torch out the bubbles, cover and wait 3-5 hours until the ArtResin reaches a jelly like stage.

You have two choices when pouring multiple layers:.

You can apply ArtResin as thick as you want, as long as you pour in multiple 1/8' coats.

ArtResin was designed as a surface coating for artwork and formulated to be poured in thin applications.

How Thick Can I Apply ArtResin Epoxy Resin?.

resining the top flat panel of the cube, waiting for it to cure, then flipping the cube around so that a new face becomes the top flat panel, ready to be resined). If you are resining a cube, you can work in stages by coating one face of the cube at a time (i.e.

Repeat until everything is covered to your desired thickness. ArtResin epoxy resin has the viscosity of honey, so you can brush it on with a disposable foam brush.Applying ArtResin Epoxy Resin to 3D Surfaces.How do I apply epoxy resin to 3D surfaces?.

3d painting on resin layers